How to apply your full color transfers
HEAT PRESS REQUIRED!
*Temperature 280° F
*Pre-press garment to remove excess moisture and remove wrinkles.
*Align transfer on blank and cover with butcher paper or teflon sheet.
*Press on medium pressure for 10 seconds.
*Allow transfer to cool for 10-15 seconds and check a corner for adhesion.
*Carefully pull clear film off.
*Place butcher paper of teflon sheet over print and press again for 10 seconds to fully activate the adhesive.
*WAIT 24 HOURS BEFORE WASHING OR STRETCHING SHIRT
TROUBLE SHOOTING
If your transfer attempts to lift when removing the clear film, allow it to cool for a few more seconds. If it continues to lift, press the transfer again with more pressure and/or more heat,(increasing the heat by 10°F) for an additional 10 seconds.
CARE INSTRUCTIONS
While the transfers are durable for many washing, to keep your transfer looking it's best please follow these washing instructions:
Turn garment inside out and wash in cold water with mild detergent. Hang drying is best but can be tumble dried on low heat.
No comments:
Post a Comment